Bi-directional amplifier, 2.4-2.4835 GHz, 100 mW output
Weatherproof bi-directional amplifier for significant increase of operational range of 2.4GHz Direct Sequence and Frequency Hopping Spread Spectrum wireless systems.
- This bi-directional amplifier allows wireless stations to operate with a great separation between indoor radio and outdoor antenna using inexpensive coaxial cable (up to 200ft. LMR400/RG8). The amplifier allows effective operation with more than one outdoor higher gain antennas using RF power splitter/combiner.
- The amplifier is intended to be pole mounted next to antenna for best efficiency.
Automatic Transmit Gain Control Feature provides: - Compensation of feed line loss (in cable, connectors and DC injector).
- Maximum allowed power delivered directly to antenna, when mounted next to antenna.
- Capability to work with any Spread Spectrum radio available on the market having various RF output power.
| - This bi-directional amplifier increases station sensitivity due to use of low noise receiving pre-amplifier.
- High receiving gain provides compensation of feed line loss.
- Built-in band-pass filter facilitates co-location with different RF systems.
- Built-in lightning protection
- Powered over the single RF cable
- "Power" and "Transmit" LED indicators on DC Injector.
- Universal Power Supply (110-240 VAC)
- 1 Year Warranty
Items - WAF2400-100 bi-directional amplifier
- DC Power Injector
- 110-240 VAC Power Supply
- Mounting Brackets
- U-bolt
- Optional: external lighting arrestor kit for improved lightning protection
|
|
Bi-directional Amplifier. Specifications | Receiver Performance | | Maximum Gain | 20 ± 2 dB | | Noise Figure | 2.8 dB | | Sensitivity | -114 dBm/MHz | | Response Unevenness | ± 0.5 dB over operating range | | Output Saturation RF Power | 10 mW | | Transmitter Performance | | Maximum Gain | 16 ± 2 dB | | Input RF Power | 0.5 - 100 mW | | Maximum Output RF Power | 100 mW | | Input/Output Impedance | 50 Ohm | | Switching Power | 0.2 - 0.4 mW | | Switch Delay Time | 0.5 - 0.8 mks | | Input/Output Connectors | N-type Female | | Operating Temperature | - 50° C - + 50° C | | Power Supply Specifications | | Input Voltage | 110 - 240 VAC 50/60 Hz | | Output Voltage/Power | 12 VDC / 10 W | | DC Power Injector | | Radio Modem Connector | N-type Female | | Amplifier Connector | N-type female | | 12 VDC Power Input Connector | BNC - Type female | | Filter Specifications | | Pass Band | 2400 - 2500 MHz | | Attenuation | 40 dB min @ 880 - 960 MHz
30 dB min @ 1710 - 1990 MHz
25 dB min @ 2100 MHz
25 dB min @ 5000 MHz
25 dB min @ 7500 MHz | | Physical Characteristics | | Amplifier Weight | 2.0 lbs (0.9 Kg) | | Amplifier Dimensions (w/ mounting plates) | 7.9 x 6.2 x 1.2 in. (200 x 156 x 30mm) | | Power Supply Weight | 1.0 lb. (0.45 Kg) | | Power Supply Dimensions | 4 x 2.5 x 1 in. (100 x 63 x 25mm) | FCC Notice: Use of RF amplifiers in the United States is subject to FCC regulations. User is responsible for compliance with applicable laws and regulations. |
