Interface type: N Male
Interface mates to: N Female
Components:
Inner Contact Material: Phosphor Bronze
Exterior finish: Gold Plate
Hex Coupling Nut Material: Brass
Exterior finish: Trimetal Plate
Spring Retaining Ring Material: Phosphor Bronze
Gasket Material: Silicone Rubber
Type N Gasket Material: Silicone Rubber
Body {Trimetal Plate}(F4pnmv2-Hc) Material: Brass
Exterior finish: Trimetal Plate
Clamp Nut/flare Ring Assembly Material: Brass
Exterior finish: Trimetal Plate
Shrink Tube Material: Polyolefin
Electrical characteristics
Recommended maximum operating frequency, GHz 10.20 Cable Limited
Peak power, max, kW 10.00 Connector Limited
Average power, max, kW @ 900MHz 0.60 Connector Limited
dc test maximum voltage 2000.00 Connector Limited
RF operating voltage, max., VRMS 707.00 Connector Limited
RF high potential, max., VRMS 990.00 Connector Limited
Inner contact resistance, milliOhms (Outer) 0.30 (2.00)
3rd Order IM, product typical @ 910MHz, -dBm (Method) 120.00 (Two +43 dBm Carriers)
Insulation resistance, min., milliOhms 5000.00 Connector Limited
Shielding effectiveness, dB -110.00
Connector impedence, ohms 50.00
Cable impedence, ohms 50.00
Insertion loss, max., dB
Mechanical characteristics
Inner attachment method Captivated
Outer attachment method Self-Flare
Connector weight, g 90.72
Pressurizable: No
Coupling nut retention force, N (lb) 445.00 (100.04)
Minimum coupling nut torque, N-m (lb-in) 1.70 (15.05)
Minimum connector retention tensile force, N (lb) 890.00 (200.08)
Minimum connector retention torque, N-m (lb-in) 5.40 (47.79)
Interface durability, number of cycles 500
Environmental characteristics
Moisture resistance test MIL-STD-202F, Method 106F
Mechanical shock test MIL-STD-202F, Method 213B, Test Condition C
Corrosion test MIL-STD-1344A, Method 1001.1, Test Cond. A
Thermal shock test MIL-STD-202F,Method 107G,Test Cond. A-1,Low Temp-55°C
Vibration test MIL-STD-202F, Method 204D, Test Condition B
Operating temperature range, °C -55°C to 85°C
Storage temperature range, °C -55°C to 85°C
Immersion test, mated connectors IEC 529:1989,IP68
Immersion depth, m 1.000
Water jetting test, unmated connectors Water jetting test, mated connectors