 |
 |
 |
 |
The AP 621 is a thin (dependent) multipurpose access point designed to lower the cost of deploying and operating a secure, reliable 802.11n wireless LAN (WLAN) in branch offices or headquarters facilities. The access point features a MIMO radio, superior receive and transmit sensitivity, and a GigE WAN uplink port. The AP 621 is easily managed remotely by a Motorola RFS 7000 or other wireless controller that discovers access points on the network and automatically downloads all configuration parameters and firmware, greatly reducing installation, maintenance and troubleshooting costs. The embedded WiNG 5 distributed intelligence ensures that traffic is locally forwarded along the most efficient paths without sacrificing quality of service and security implemented at the access point itself.
- REGULATORY SPECIFICATIONS
- Electrical safety
- UL 60950, cUL, EU EN 60950, TUV and UL 2043 (external antenna)
-
- POWER SPECIFICATIONS
- Integrated power over ethernet support
- Standards-based IEEE 802.3af
-
- Operating current
- 270mA rms at 48V
- Operating voltage
- 802.3af supply: 48 VDC @ 12.95W (typical), 36 VDC to 57 VDC (range)
-
- USER ENVIRONMENT
- Electrostatic discharge
- +/- 15 kV (Air), +/- 8 kV (contact)
-
- Storage altitude
- 15, 000 ft. (4572 m)
- Operating altitude
- 8, 000 ft. (2, 438 m)
-
- Operating humidity
- 5-95% (non-condensing)
- Storage temperature
- -40°F to 158° F (-40°C to 70° C)
-
- Operating temperature
- 32°F to 104° F (0°C to 50° C)
- RADIO SPECIFICATIONS AND NETWORKING
- Operating bands - EU
- FCC EU 2.412 to 2.462 GHz 2.412 to 2.472 GHz 5.150 to 5.250 (UNII -1) 5.150 to 5.250 GHz5.725 to 5.825 (UNI -3) 5.150 to 5.350 GHz 5.725 to 5.850 (ISM) 5.470 to 5.725 GHz
-
- Maximum transmit power settings
- 27dBm
- Operating channels
- 5GHz: All channels from 4920 MHz to 5825 MHz
- 2.4GHz: Chan 1-13 (2412-2427 MHz), Chan 14 (2484 MHz) Japan only
- Actual operating frequencies depend on national regulatory limits
-
- Uplink
- Auto-sensing 10/100/1000Base-T Ethernet
- Wireless medium
- Direct Sequence Spread Spectrum (DSSS) and Orthogonal Frequency Division Multiplexing (OFDM), and Spatial Multiplexing (MIMO)
-
- Network standards
- 802.11a, 802.11b, 802.11g, 802.11n
- Data rates supported
- 802.11b/g: 1, 2, 5.5, 11, 6, 9, 12, 18, 24, 36, 48, and 54Mbps; 802.11a: 6, 9, 12, 18, 24, 36, 48, and 54Mbps; 802.11n: MCS 0-15 up to 300Mbps
-
- PHYSICAL CHARACTERISTICS
- LEDs
- 2 LED indicators with multiple modes indicating 2.4GHz/5 GHz Activity, Power, Adoption and Errors
-
- Available mount configurations
- Internal antenna: Ceiling-mount (to suspended ceiling T-bars, below tile); wall mount
- External antenna: Ceiling-mount (above tile); wall-mount
- Weight
- Internal antenna: 2.0 lbs. (.91 kg.)
- External antenna: 2.5 lbs. (1.14 kg.)
-
- Dimensions (HxWxD)
- Internal Antenna: 6.0 in. L x 5.5 in. W x 1.63 in. H (15.24 cm L x 13.97 cm W x 4.11 cm H)
- External antenna: 6.0 in. L x 5.5 in. W x 1.63 in. H (15.24 cm L x 13.97 cm W x 4.11 cm H)
Read this specifications sheet to learn about what the AP 621 can do.(Updated 2011/07/20 | PDF 447 KB)
|
|
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
Features
- Powered by Motorola’s WiNG 5 distributed architecture, the AP 621 Wireless Access Point offers top 802.11a/b/g/n performance along with direct forwarding, security and QoS services at the edge.
Automatic channel and power optimization The SMART RF feature of the switch/controller automatically optimizes power and channel selection so each user gets always-on high-quality access and mobility
High reliability Optimizes network availability through its central and pre-emptive intelligence, which dynamically senses weak or failing signals, securely moves user to alternate APs, and boosts signal power to automatically fill RF holes and ensure uninterrupted mobile user access
Gap-free security Includes layer 2-7 stateful packet filtering firewall, AAA RADIUS services, Wireless IPS-lite, VPN gateway, and location-based access control
Fast and easy deployment Requires no configuration or manual firmware maintenance. The Motorola wireless controller discovers access points on the network and automatically downloads all configuration parameters and firmware, greatly reducing installation, maintenance and troubleshooting costs for Layer 2 and Layer 3 deployments
Device and network acceleration Device and network performance can be accelerated through a virtual LAN feature via the switch/controller. Each AP 621 access point can be virtualized into four unique VLANs. This improves device performance and battery life up to 25% and reduces the overall number of access points required
Full 802.11n performance with standard 802.3af Simplifies and reduces total cost of installation using standard Power-over-Ethernet (PoE)
Multiband operation Supports both 2.4 GHz and 5.0 GHz frequency bands.
Mobility Supports fast secure roaming
Application support Supports Call Admission Control for optimized VoWLAN performance, as well as video streaming and data throughput for 802.11a/b/g/n clients
Load balancing, pre-emptive roaming and rate scaling Increases reliability and resilience of the wireless network to support mission critical applications
|
|
 |
 |
 |
 |

|